Oil Pump Restoration Photos

User avatar
ol brown shoe
Training Wheels
Posts: 949
Joined: Fri Oct 08, 2010 11:48 pm
Location: Saugus, So Cal
Contact:

Post by ol brown shoe » Wed Sep 05, 2012 8:18 pm

Beautiful DEET![ok]
Hill Climber
Training Wheels
Posts: 12
Joined: Wed Aug 22, 2012 10:56 pm
Location: Eastern Washington

How to Identify Autolube Pump

Post by Hill Climber » Fri Sep 07, 2012 4:08 pm

I have a used pump, shaft and gear that I plan to install in my RT2 (s/n RT1-107xxx). The bike didn't have a pump installed when I bought it and the metal around the boss where the shaft passes thru the clutch case was cracked. Bought a used case that is good and seal. How can I identify that the used pump, shaft and gear are indeed the correct ones for this bike?
User avatar
lha
Training Wheels
Posts: 2669
Joined: Mon Apr 25, 2011 6:35 pm
Location: Tennessee

Post by lha » Wed Sep 12, 2012 7:56 pm

You could look up the pump on a parts website. They are coded with a dot of color[yellow,white,etc] if the pump is original,there will be a spot of paint on the pump body,and the #s will be the same. At least that's how I found a replacement for mine that was questionable.I got one on Ebay for about $7.50,sent it to DEET,and now it's as good or better than new. lha
User avatar
DEET
Posts: 13589
Joined: Thu Nov 18, 2004 11:16 am
Location: North Carolina, USA.

Post by DEET » Fri Jul 31, 2015 9:27 pm

Image



Image




Image




After welding up the shaft, I turned it on the lathe.

Ready for another 40 years.
[SIGPIC][/SIGPIC]
Where the Yamaha Enduro is still a current model...
Yamaha Parts Diagrams located here: CLICK ME
Post Reply